CAR LIFTS – PARKING SYSTEMS
Independent parking system
UN & Starke
These independent parking platforms for 2 or 4 cars, which are suitable for both commercial and residential purposes, allow the parking of one vehicle without moving another car. This system requires the creation of a floor during the construction of the building with certain dimensions .
Advantages
- Possibility of parking 2 or 4 vehicles.
- Ability to suspend a payload of up to 2,700 kg.
- Variety in platform dimensions.
- Compatible design to perfectly serve the needs of each project.
- Certification based on Machinery Directive 2006/42/EC and En14010.
Specifications
| Model | UN_LPS | UN_OPS | Starke 2127 | Starke 2227 |
| Vehicles parked per unit | 4 | 2 | 2 | 4 |
| Rated capacity (kg) / Per Platform | 2500 | 2500 | 2700 | 2700 |
| Available car length (mm) | 5000 | 5000 | 5000 | 5000 |
| Available car width (mm) | 2050 | 2050 | 2050 | 2050 |
| Available car height (mm) | 1700 | 1700 | 1700 | 1700 |
| Waving plate | Galvanized steel sheet | Galvanized steel sheet | Galvanized steel sheet | Galvanized steel sheet |
| Drive mode | Hydraulic cylinder and chains | Hydraulic cylinder and chains | Hydraulic cylinder and chains | Hydraulic cylinder and chains |
| Operation | Button Hold to Run | Button Hold to Run | Keyswitch | Keyswitch |
| Lifting speed | 30s | 30s | <55s | <55s |
| Descending speed | 25s | 25s | <55s | <55s |
| Finishing | Ral 7040 (can be galvanized for outside use) | Ral 7040 (can be galvanized for outside use) | Powder coating | Powder coating |
Car lifting system
KTS
KTS car lifting systems are designed for vertical transport of vehicles between two or more levels. In buildings where it is not possible to build a ramp or install a car lift, KTS systems provide the ideal solution for vertical transport up to 12 meters. KTS vehicle lifting systems are manufactured in accordance with the Machinery Directive 2006/42/ EC. Their main advantages are ease of installation and maintenance.
Advantages
- Ability to suspend a payload of up to 3,000 kg.
- Possibility of cooperation with industrial type rolls.
- Parking protection with a light curtain system.
- Possibility of construction in projects with a shallow bottom depth.
- Optimum utilization of the installation space with absolute adaptation to the well spaces.
- Compatible design to perfectly serve the needs of each project.
- Type examination certification and CE marking
Specifications
| Model | KTS 2200 | KTS 3000 |
| Rated load (Kg) | 4 | 2 |
| Max Travel (mm) | 12000mm | 10000mm |
| Stops | 4 | 4 |
| Platform (mm) | 2440*5500mm | 2440*5500mm |
| Speed | 0,15m/sec | 0,15m/sec |
| Pit depth (mm) | 400mm | 500mm |
| Headroom (mm) | 2700mm | 2700mm |
| Motor | 9,5Kw/380V/50Hz | 12Kw/380V/50Hz |
| Pistons | KZA C100X5 / KZA C110X7,5 | KZA C110X7,5 |
| Tank | Kleemann T150 | Kleemann T250 |
| Controller | KTS GL-1 | KTS GL-1 |
| Block of valves | Blain KV1S | EV100 3/4 |
| Landing doors | Roller shutters with 3-phase external motor | Roller shutters with 3-phase external motor |
| Complies with | Machinery Directive 2006/42/EC - EC type examination certificate | Machinery Directive 2006/42/EC - EC type examination certificate |
Scissor car lifting system
Single & two-stage
KLEEMANN single-stage and two-stage scissor lifts provide a simple and convenient way to facilitate and optimize parking. Suitable for underground, higher and lower level parking spaces, KLEEMANN scissor lifts are an ideal choice when entrances and exits are limited.
Accommodating up to 3 stops, a range of safety features and a choice of 4000mm or 7400mm vertical travel, KLEEMANN scissor lifts are a smart solution for creating practical and easy access to all types of parking spaces.
Advantages
- Ability to suspend a payload of up to 3,000 kg.
- Possibility of cooperation with industrial type rolls.
- Possibility of single-stage or two-stage mechanism depending on the lifting path.
- Optimum utilization of the installation space with absolute adaptation to the well spaces.
- Harmonized according to the Machinery Directive and type-examination certified.
Specifications
| Model | Single Scissor Platform | Double Scissor Platform |
| Rated load (Kg) | 3000 | 3000 |
| Max Travel (mm) | 4000 mm | 7400 mm |
| Stops | 2 | 3 |
| Platform (mm) | 3000 * 6000 mm | 3000 * 6000 mm |
| Speed | 0,05 – 0,08 m/sec | 0,05 – 0,08 m/sec |
| Pit depth (mm) | 500mm | 600mm |
| Headroom (mm) | 2500mm | 2500mm |
| Motor | 5,5Hp/380V/50Hz | 7,5Hp/380V/50Hz |
| Pistons | 2 items Φ70-Φ120X135 | 2 items Φ80-Φ140X160 |
| Landing doors | Roller shutters with single-phase motor | Roller shutters with single-phase motor |
| Complies with | Machinery Directive 2006/42/EC - EC type examination certificate | Machinery Directive 2006/42/EC - EC type examination certificate |
English 
Greek